Our ATEX explosion proof wall-mounted air conditioner is specially designed to obtain optimal air distribution. Taking into account the characteristics of the gases or dusts present. (Heavier of lighter than air.) You can ensure the desired air flow, by mounting the device at the right position on the wall (high or low). Ask us for expert advice for the best mounting position in your specific ATEX Zone.
As the wall-mounted units are of limited size they are suitable for industrial use in analyser rooms, storage rooms, battery rooms, control cabins or other working facilities.
We provide explosion proof versions of the latest wall mount indoor air conditioner units of Mitsubishi Electric, Daikin, Samsung and Carrier. All wall mount indoor models can be connected to explosion proof outdoor units using refrigerant R32 or R410a.
On request, Ex-Machinery provides explosion proof conversions for other leading HVAC products and brands, such as Daikin, Carrier and Toshiba.
All our air conditioning units are supplied with:
- Declaration of conformity 3G/D
- Installation instruction for hazardous areas
- User manual
Our Brands and Models
||Ambient Temperature||Advantage||Product Sheet|
||R-410A or R32||50 ℃||Best buy||Product Sheet|
|Samsung Super High Ambient
||R-410A or R32||55 ℃||Highest Ambient Temperature||Product Sheet|
||R32||52 ℃||High Ambient Temperature||Product Sheet|
|Mitsubishi Mr. Slim
||R32||46 ℃||Original Mr. Slim||Product Sheet|
||R32||46 ℃||Economical option||Product Sheet|
Specifications: ATEX Air Conditioner Wall-Mounted Unit
General Technical Specifications
|Capacity||1.5 - 10 kW|
|Power Supply||1 Phase 230 VAC, 50/60 Hz
3 Phase with or without neutral, 440 VAC, 50/60 Hz
|Type||Indoor unit, Wall Mount|
|Technology||Inverter, silent scroll compressor, refrigerant R410-A and R32|
|Control||Infrared remote control or wired wall mount control unit|
|Indoor & outdoor
|Indoor and or outdoor units can be delivered in ATEX version or standard CE version. Sets may consist of a combination of ATEX and non-ATEX units.|
||ATEX zone 2 controller for multiple indoor units. ATEX zone 2 interface to connect with external thermostat.|
Explosion Safety Specifications (ATEX)
|EU Directive||2014/34/EU (ATEX 114)|
|ATEX marking gas||EX ic nAC IIB (+H2) T4/T3 Gc|
|ATEX marking dust||3D Ex ic tc h IIIB T135°C/200° Dc|
|Applied Standards||EN 60079-0; Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-11; Explosive atmospheres - Part 11 : Equipment protection by intrinsic safety "i"
EN 60079-15; Explosive atmospheres - Part 15 : Equipment protection by type of protection "n"
EN 60079-31; Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 80079-36; Explosive atmospheres : Non-electrical equipment for explosive atmospheres - Basic method and requirements
EN 80079-37; Explosive atmospheres : Non-electrical equipment for explosive atmospheres - Non-electrical type of protection “h”